Source Water Purification

Treatment of the planet’s hardest waters

For manufacturers, raw water sources are inadequate from a quality or quantity perspective.

ROKON Reverse Osmosis System or REKON Ion Exchange System are used independently or in succession, to purify your raw water supply to the required water parameters for use in your facility.

Below are examples of Industrial Wastewater Purification and Raw Water Treatment using our ROKON Reverse Osmosis and REKON Ion Exchange Systems.

ROKON Logo 50T

REVERSE OSMOSIS

ROKON SS Skid 250T
  • Kontek’s ROKON Reverse Osmosis Systems can be used to purify raw water or treated wastewater. Our highly efficient design process and extensive knowledge of membrane technology results in recovering up to 87.5% of your feed water as high-quality Reverse Osmosis permeate. Proper pre-treatment of the feed water is essential to maintaining high rejection and recovery rates. Your ROKON Reverse Osmosis System removes up to 99% of contaminants and consistently generates clear water.
  • Application: ROKON Reverse Osmosis Systems are used when feed water conductivity is above 500 ppm of dissolved solids.
  • High Recovery & Rejection Rates
    Your ROKON Reverse Osmosis System will recover up to 87.5% and reject up to 99% of your water’s contaminants depending on the feed water quality
  • Lower operating costs
    We design the most efficient pre-treatment for your RO feedwater using high quality, low fouling RO membranes. Energy-saving VFDs on the ROKON Reverse Osmosis System’s pumps minimize maintenance requirements and maximize the life of your equipment.
  • Reliability
    Kontek’s     ROKON Reverse Osmosis Systems can be designed to operate for 24 hours/day to produce the required amount of RO water to meet your facility’s volume requirements. Our control package allows for safe, unattended operation.
Read more
REKON Logo 50T

ION EXCHANGE

REKON 250T
  • Kontek’s REKON Ion Exchange Systems can be used to purify raw water or untreated wastewater, producing high-quality deionized water for recycling.  Our conservative design results in 100% feed water recovery, with regeneration wastes accounting for 3% of the total volume recovered, thereby achieving a net recovery of 97%.
  • Application: REKON Ion Exchange Systems are utilized when feed water conductivity is below 500 ppm of dissolved solids.

  • High Recovery Rate
    Your REKON Ion Exchange System will recover up to 97% of your water depending on the feed water quality.

  • Fully Automated Operation
    Your REKON Ion Exchange System is manufactured with up to 36 automatic valves, allowing the service and regeneration cycles to operate 24/7.

  • Conservative Design
    We design the lowest flow rate per cubic foot of resin, meaning long service run times with minimal regeneration frequencies.

Read more