Source Water Purification
Treating the planet’s hardest waters with industrial water purification systems
For manufacturers, well or city water is inadequate from a quality or quantity perspective. Source water purification is the reduction or removal of total dissolved solids commonly found in city or well water intended as a source for use for industrial applications. Some applications include, metal plating, metal finishing, surface preparation, can manufacturing, electronics manufacturing, aerospace cleaning and even hydroponics agriculture.
ROKON Reverse Osmosis System or our REKON Ion Exchange System is used independently or in succession to purify source well or city water supply. Reverse osmosis uses membrane technology to filter out dissolved solids, while ion exchange uses resins to purify water. The result is purified water meeting the parameters for use in your industrial process.
Below is how industrial source water purification and wastewater treatment is used with our ROKON Reverse Osmosis and REKON Ion Exchange Systems.
- Application:Â ROKON is used when feed, well, or city water conductivity is above 500 ppm of dissolved solids.
- Purify well or city source water or treated wastewater.
- Proper pre-treatment of the feed water is essential to maintaining high rejection and recovery rates.
- High Recovery & Rejection Rates – can recover up to 87.5% of process water and reject up to 99% of your water’s contaminants depending on the feed water quality
- Lower operating costs – We design the most efficient pre-treatment for your RO feedwater using high quality, low fouling RO membranes.
- Energy Saving VFDs – on ROKONÂ pumps minimize maintenance requirements and maximize the life of your equipment.
- Reliability – ROKON can be designed to operate for 24 hours/day to produce the required amount of RO water to meet your facility’s volume requirements. Our control package allows for safe, unattended operation.
- Application: REKON Ion Exchange Systems are utilized when feed, well or city water conductivity is below 500 ppm of dissolved solids.
- Our REKON Ion Exchange Systems can be used to purify well, city source water or untreated wastewater, producing high-quality deionized water for recycling.Â
- Our conservative design results in 100% feed water recovery, with regeneration wastes accounting for 5% of the total volume recovered, thereby achieving a net recovery of 95%.
High Recovery Rate – REKON will recover up to 95% of your water depending on the feed water quality.
Fully Automated Operation – REKON Ion is manufactured with up to 36 automatic valves, allowing the service and regeneration cycles to operate 24/7.
Conservative Design – designed for the lowest flow rate per cubic foot of resin resulting in long service run times with minimal regeneration frequencies.