KC20-QE Quad Extended Ion Exchange System

KC20-QE QUAD EXTENDED COLUMN ION EXCHANGE SYSTEM

( 2 CU. FT.) CAPACITY

This unit is typically used for tri-chrome bath tank sizes up to 1,000 USG, subject to confirmation of the tramp metals loading rates.

One seal-less magnetically coupled pump with priming chamber & pump discharge pressure
One polypropylene filter chamber capacity (1) 30” DOE filter cartridge to prevent fouling
Four flow meters with needle valve to accurately control the flow of the process solution, regenerant chemical and rinse water through the column
Two 40” resin columns each build-in resin screen to contain the resin, and constructed of polypropylene and acrylic.

( 2 CU. FT.) CAPACITY

This unit is typically used for tri-chrome bath tank sizes up to 2,500 USG, subject to confirmation of the tramp metals loading rates.

Prefiltration chamber removes suspended solids to prevent resin fouling
Optimal pump performance and lifespan using corrosion-resistant magnetic coupled seal less pump
Standard controls include pump run-dry protection
Reduces system downtime for regeneration and reduces resin costs with ion-selective gel resin that hold up to 3 lbs. of tramp heavy metals metal per cubic foot
Saves labour and cleaning costs with quick, easy and infrequent offline regeneration cycles, which use the onboard process pump for regeneration chemistry
Protects your resin with proprietary resin containment and screening
Removes only targeted tramp metal ions with proprietary TC selective gel resin
Accurate flow meters control your flow rates for process solution, regenerant chemicals and rinse water for each KC column

Priming chamber to provide the pump with flooded suction.
Magnetic-coupled, seal-less pump used for recirculation of process solution through the resin column(s) as well as pumping regeneration chemicals and rinse water supply to the column when regeneration of the resin is required.
A junction box with on/off pump control is mounted above the pump.Filter housing (with 20 micron filter cartridge) to prevent fouling of the resin screens.
Dry stop sensor for pump protection.
Flow meter with needle valve for each column, to accurately control the flow of process solution, regenerant chemical and rinse water through the resin bed in each column.
One to four resin columns with screens to contain the resin, connected in parallel to the recirculation pump.